Disruptive Manufacturing Technologies (DMT)

The summary for the Disruptive Manufacturing Technologies (DMT) grant is detailed below. This summary states who is eligible for the grant, how much grant money will be awarded, current and past deadlines, Catalog of Federal Domestic Assistance (CFDA) numbers, and a sampling of similar government grants. Verify the accuracy of the data FederalGrants.com provides by visiting the webpage noted in the Link to Full Announcement section or by contacting the appropriate person listed as the Grant Announcement Contact. If any section is incomplete, please visit the website for the DARPA Defense Sciences Office, which is the U.S. government agency offering this grant.
Disruptive Manufacturing Technologies (DMT): DISRUPTIVE MANUFACTURING TECHNOLOGIES (DMT)SOL: BAA06-34, Full Proposals Due 1600 ET, November 16,2006 DESCRIPTIONThe rate at which asymmetric threats evolve has increased the speed with which new systems and platforms must be produced and increased the need to distribute new technologies (e.g., upgraded body armor) to a larger number of troops. Ironically, at the same time, increased lethality of our modern weapon systems has resulted in a reduction of the number of large systems required to accomplish missions. This new environment places a premium on fast and affordable manufacturing processes. Furthermore, when the cost of manufacturing spare parts is taken into consideration, it becomes clear that new approaches to defense manufacturing are critically needed to guarantee the future success of the military. To address this shortfall, this Broad Agency Announcement (BAA) is focused on disruptive manufacturing technologies that will have a pervasive impact on DoD systems and platforms, both current and future. Note that while the substitution of higher performing components (for example, ceramics for metals or new semiconductors) is an important area of research, this is NOT the purpose of this BAA. A Proposer Information Pamphlet (PIP) for this program provides further information on Disruptive Manufacturing Technologies (DMT), the submission, evaluation, and funding process, white papers, proposals, teaming information, and other general information. The DMT PIP is available online at http://www.darpa.mil/dso/solicitations/DMT.pdf Successful proposals to this BAA will be focused on reducing the fabrication time as well as the cost of materials and/or components that are currently used (or currently programmed for use) in existing platforms or would be used if their price was reduced. Thus, each proposal must have at least one component challenge problem that will culminate in the qualification of the manufacturing approach for existing materials/components where time, price and performance metrics exist for benchmarking. It is anticipated that the challenge problem components will be qualified as preferred spares or as part of a spiral upgrade to the system. This requirement will ensure that all the fabrication and related finishing and nondestructive analysis tools are in place to provide quantitative benchmarks with the conventional manufacturing processes. That said technologies that are pervasive beyond the specific challenge problem will be considered more favorably. TOPICAL AREAS OF INTEREST TO DMTThe following list illustrates some of the possible research areas (these examples are not meant to be all inclusive). Any disruptive research topic that can be justified against the criteria found in this BAA will be acceptable. Raw Materials: Approaches for significantly reducing the cost of raw materials especially through a radical change in the process that changes the cost paradigm. Tooling:Approaches for rapidly defining and producing production quality tooling or approaches for completely eliminating tooling. Part Manufacturing: Approaches that reduce the cost of manufacturing, such as technologies for fabrication of composite parts without the need for an autoclave or near-net-shaped metallurgical fabrication of a high value metal such as titanium. Precision Assembly:Approaches that reduced the cost of producing precise finished parts. For example, improving the weldability of metals such as titanium, or production of alignment jigs and gages.Manufacturing Equipment: Approaches to (1) significantly reduce the cost of capital equipment and therefore the total cost of parts made in small lot sizes, or (2) significantly increasing the uniformity and repeatability of production, thereby enabling a mixed product stream comprising diverse processes, devices, and materials to be efficiency fabricated on high-volume manufacturing equipment.Of particular interest is manufacturing tools that enable affordable low volume manufacturing of Microsystems Components, including Micro Electromechanical Systems (MEMS), electronics, and photonics.Photonics: Approaches for significantly reducing the cost of integrating photonics into military systems. This could include approaches for dramatically reducing the packaging cost of key components, e.g., transceivers that can consume up to 90 percent of the cost of the final component, cabling costs, fiber optic backplanes, integrated PWB/photonic modules. Software Producibility: Software enabled products that can adapt to new environments, are critical to ensuring critical functionality and long life for complex manufacturing systems. Methodologies and tools for developing adaptive software are needed. How can adaptive features be built in at an acceptable cost? How general can these adaptive features be? How can one ensure that destructive adaptation be prevented? The following list illustrates examples of current DARPA efforts that would qualify under this BAA in order to provide further guidance on what would be considered to be a DARPA Manufacturing Technology program:DARPA Initiative in Titaniumhttp://www.darpa.mil/dso/thrust/matdev/titanium.htmAccelerated Manufacturing of Pharmaceuticalshttp://www.darpa.mil/dso/solicitations/solicit.htmDiscovery and Exploitation of Structure in Algorithmshttp://www.darpa.mil/dso/thrust/math/algorithms.htmWide Bandgap Semiconductor Technologyhttp://www.darpa.mil/mto/wbg/Thrust I - RF/Microwave/Millimeter-wave Technology http://www.darpa.mil/mto/rf/index.htmlThrust II - High Power Electronicshttp://www.darpa.mil/mto/hpe/index.htmlSupermolecular Photonics Engineeringhttp://www.darpa.mil/mto/morph/index.htmlMEMS Exchangehttp://www.darpa.mil/mto/memsexchange/Antimonide Based Compound Semiconductorshttp://www.darpa.mil/mto/abcs/index.htmlThe goals of this program will be enhanced by a multi-disciplinary team of companies and technologists. Expertise may include materials science and engineering, machine design, process modeling, technical cost modeling, structural mechanics, nondestructive analysis as well as application specific expertise. The team may include technology companies, part fabricators, and tooling companies. Most importantly, it is critical that each research team identify which team member will serve as the Systems Integrator (SI) and take ultimate responsibility for acceptance and implementation of successful technology. The SI will be responsible for liaison with the military acquisition command responsible for the purchase and qualification of the class of components to be demonstrated. Since team composition will ultimately determine the success of this program, a teaming website is provided to facilitate these interactions and can be found at http://www.sainc.com/DMTTeaming.WHITE PAPER SUBMISSIONSBefore proposers put together a full proposal, it is highly recommended that a white paper be submitted in response to this BAA. This white paper should clearly state the uniqueness of the disruptive manufacturing idea presented in the context of existing defense manufacturing capabilities. The white paper should also describe the proposed approach and explain why it is unique. Further, the proposer should estimate the direct and/or indirect cost savings that would result from a successful project and the extent to which the project would have pervasive impact relative to number of Defense systems impacted. Key quantifiable milestones expected in the effort should be described. Also, a brief discussion of the technical expertise of the proposed principal investigator and other key team members should be provided. Finally, an estimate of the program costs and duration (in months) should be included. White papers should not be longer than 8 pages. A website http://www.sainc.com/DMT0634 has been set up to facilitate the submission of white papers. White paper submissions may also be made by attachment to an e-mail sent to [email protected] (Word 97 or higher is recommended). WHITE PAPERS ARE DUE NO LATER THAN 1600 ET, Thursday August 24, 2006. FULL PROPOSAL SUBMISSIONSThe PIP outlines necessary details for full proposal submission. Proposals shall consist of two volumes: Technical and Cost. Both volumes should be included as a single document when uploaded to the website. FULL PROPOSALS ARE DUE NO LATER THAN 1600 ET, Thursday November 16, 2006. EVALUATION CRITERIAEvaluation of proposals will be accomplished through a technical review of each proposal using the following criteria, listed in order of importance: Scientific and Technical Merit of the ProposalProposers must demonstrate that the disruptive manufacturing technology that they proposed is innovative and unique, that they have an understanding of critical technical issues and risks related to the success of that technology and that they have a plan for mitigation of those risks. Successful proposals will also demonstrate a full understanding of the current processes that are to be replaced and provide detailed technical justification of why the proposed technology will indeed improve the process. Proposers should clearly and quantitatively recommend and justify technical milestones for both Phases I and II that are on the critical path to successful insertion of the technology. Value to DefenseProposers must demonstrate the potential of successful research to radically change the cost structure of the manufacture of a critical material/part/component currently used in a DoD system. Proposers must also quantitatively justify any claims of pervasive value of this technology to DoD in general. Proposers must demonstrate they understand the path to insertion of this technology into existing and future DoD systems. Efforts with shorter timeframes to insertion will be considered to have increased value to Defense.Capability of the Personnel and Facilities to Perform the Proposed EffortProposers must demonstrate that their team has the necessary background and experience to perform this project. This includes the identification of Systems Integrator and the potential role on the team of the ultimate Service/industry transition partner. The balance of the technical capabilities of the team must match that required in the program plan. The relevant experience of key personnel must be sufficient to provide confidence that the proposers can accomplish their objectives. Proposers must demonstrate that the combined facilities of the team are sufficient to accomplish the objectives of the proposal.Cost RealismCosts of the proposal must be reasonable for the technical work described and provide a high value to the Government. Small Disadvantaged Businesses, Historically Black Colleges and Universities (HBCUs), and Minority Institutions (MIs) are encouraged to submit proposals and join others in submitting proposals. However, no portion of this BAA will be set aside for Small Disadvantaged Businesses, HBCU, and MI participation due to the impracticality of reserving discrete or severable areas of this research for exclusive competition among these entities. ADMINISTRATIVE ADDRESSESMailing Address for Submission of White Papers or Full Proposals (Except Classified Proposals):DARPA/DSO, ATTN: BAA06-343701 North Fairfax DriveArlington, VA 22203-1714Web Address for White Paper and Full Proposal Submission: http://www.sainc.com/DMT0634Fax Number and Email Address for Administrative Questions:Fax: (571) 218-4553 (Addressed to: DARPA/DSO, BAA06-34) Electronic Mail: [email protected] This announcement may be retrieved via the WWW at URL http://www.darpa.mil/baa/.PROPOSALS ARE DUE NO LATER THAN 1600 ET, Thursday, November 16, 2006Web address for Full Proposal Submission: http://www.sainc.com/DMT0634TECHNICAL POINTS OF CONTACTLee Badger, Information Processing Technology Office, Phone (571) 218-4327, Fax (703) 248-1879, Email: [email protected] Coblenz, Defense Sciences Office, Phone (571) 218-4647, Fax (703) 248-1852, Email: [email protected] Evans, Microsystems Technology Office, Phone (571) 218-4524, Fax (703) 248-1808, Email: [email protected] Kirkpatrick, Advanced Technology Office, Phone (703) 696-4762, Fax (703) 516-8788, Email: [email protected] Leininger, Information Exploitation Office. Phone (571) 218 4528, Fax (703) 248-1820, Email: [email protected] Zakin, Special Projects Office, Phone (703) 248-1509, Fax (703) 807-1743, Email: [email protected]
Federal Grant Title: Disruptive Manufacturing Technologies (DMT)
Federal Agency Name: DARPA Defense Sciences Office
Grant Categories: Science and Technology
Type of Opportunity: Discretionary
Funding Opportunity Number: BAA06-34
Type of Funding: Other Procurement Contract Grant Cooperative Agreement
CFDA Numbers: 12.910
CFDA Descriptions: Research and Technology Development
Current Application Deadline: No deadline provided
Original Application Deadline: Oct 19, 2006
Posted Date: Jul 05, 2006
Creation Date: Sep 20, 2006
Archive Date: Nov 17, 2006
Total Program Funding:
Maximum Federal Grant Award: $0
Minimum Federal Grant Award: $0
Expected Number of Awards:
Cost Sharing or Matching: No
Applicants Eligible for this Grant
Unrestricted (i.e., open to any type of entity above), subject to any clarification in text field entitled "Additional Information on Eligibility"
Grant Announcement Contact
DARPA/DSO, BAA06-34
FAX: 571-218-4553
[email protected] Email address
Similar Government Grants
Material Synthesis Technologies for Universal and Diverse Integration Opportunities (M-STU...
Scientific Feasibility (SciFy)
Expeditionary Carbon Utilization for energy Resilience and Stabilization (ExCURSion)
BioLogical Undersea Energy (BLUE)
Young Faculty Award (YFA) 2024
Wide Band Gap Semiconductors for RF Applications (WBGS-RF)
Robust Integrated Power Electronics (RIPE)
Microantenna Arrays:Technology and Applications (MIATA)
More Grants from the DARPA Defense Sciences Office
Expeditionary Carbon Utilization for energy Resilience and Stabilization (ExCURSion)
Defense Sciences Office (DSO) Office-wide BAA
Synthetic Quantum Nanostructures (SynQuaNon)
Principles of Undersea Magnetohydrodynamic Pumps (PUMP)

FederalGrants.com is not endorsed by, or affiliated with, any government agency. Copyright ©2007-2024 FederalGrants.com